Archived Mold Remediation Blog Posts
Conditions In the Statesboro Area Might Be Right For Mold
8/17/2021 (Permalink)
SERVPRO knows what to do if Mold grows in your home.
It’s estimated that more than 1 million types of mold exist, yet less than 10 percent have actually been named. This means mold is very common in both indoor and outdoor environments. While mold and humans can sometimes co-exist without issue, there are certain species of mold that can cause health effects for some people.
If the right conditions exist, mold will grow. Those conditions include:
- Water - Different mold types require varying amounts of liquid before growth begins.
- Temperature - Normal indoor temperatures will promote mold growth.
- Time - Initial mold colonizers can take hold within one day after being exposed to an adequate water supply.
Mold growth can occur in any home, so it’s important to keep an eye out for situations that might promote mold activity. Roof/chimney leaks, wet basements, or condensation from ducts that dampen surrounding insulation are just a few examples of issues that make a house a prime target for mold growth.
If you suspect mold in your home, call SERVPRO of Statesboro to assess the situation. We have the knowledge, tools and track record to effectively remediate mold in your home or business.
If you suspect mold, call us today at (912) 764-9542
What to Do:
- Stay out of affected areas.
- Turn off the HVAC system and fans.
- Contact SERVPRO of Statesboro for mold remediation services.
Does Your Statesboro Area Home Have a Mold Problem?
8/9/2021 (Permalink)
Mold can spread through a home in as little as 48 hours!
Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce health effects.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.
If You See Signs of Mold, Call Us Today – SERVPRO of Statesboro- 912-764-9542
Do's and Don't's of Mold
2/6/2019 (Permalink)
If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.
What to Do:
- Stay out of affected areas.
- Turn off the HVAC system and fans.
- Contact SERVPRO of Statesboro for mold remediation services.
What Not to Do:
- Don’t touch or disturb the mold.
- Don’t blow air across any surfaces with visible or suspected mold growth.
- Don’t attempt to dry the area yourself.
- Don’t spray bleach or other disinfectants on the mold.
About Our Mold Remediation Services
SERVPRO of Statesboro specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business. Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.
If You See Signs of Mold, Call Us Today – 912-764-9542
Should I Encapsulate My Crawl Space?
10/10/2017 (Permalink)
Crawl space encapsulation is a generic term used to describe a crawl space that is protected from moisture by using a vapor barrier on the floor and walls. This term was and is widely marketed by different basement waterproofing franchises in the early part of the century. Crawl space encapsulation has become directly associated with a white vapor barrier installed in the crawl space to cover the floor and walls.
Improvement over a “closed” crawl space
An encapsulated crawl space uses all of the features applied to a closed crawl space with a few exceptions. To be an encapsulated crawl space the vapor barrier is continued up the foundation wall and sealed (taped) to the floor vapor barrier. All supports, as well as plumbing that comes through the dirt and walls are also sealed. A polyurethane caulk or two sided foundation tape is applied between the foundation wall and the crawl space vapor barrier to seal the moisture under the barrier. In most cases the vapor barrier that is used is made of high quality polyethylene with a polyester mesh reinforcement. Although some companies offer a clear visqueen plastic purchased from a local hardware as a solution to keep their costs down.
Environmental Control
The purpose of crawl space encapsulation is to create an environment that can be controlled. The reason the open crawl space is so bad is because the environment is allowed to change daily, sometimes hourly. Much like building a swimming pool and refusing to full it with water because of the extra expense and time, the steps to encapsulating a crawl space should end with an environment that you are controlling and therefore you have conditioned the air. Once you have transformed the space, by way of crawl space encapsulation, into an area that is part of the house it will be cleaner and healthier for your home and family.
Think of it as a….
Maybe you have heard or read somewhere on this site that a crawl space is like a basement in many ways. Well, it is. In the function of the homes air quality and moisture penetration. Crawl space encapsulation is essentially the same answer to a crawl space as the concrete floor in a basement. Under that concrete floor is a vapor barrier to control moisture. The concrete on the floor is for walking or use durability only. When a quality vapor barrier is used to encapsulate a crawl space it will hold up to crawl traffic and not tear like thin plastic will.
It’s Just Plastic
Not all crawl space vapor barriers are created equal, but the truth is all will help in some way. A quality vapor barrier will last for 25 years or more, while a 6 or 10 mil clear plastic from the hardware store might last 3 to 5 years. The real investment is in the time and effort it takes to do it right, so for a little bit more money up front your efforts will have a lasting result. If odor is a concern make sure the vapor barrier that is installed is made of polyethylene and not PVC. PVC liners will off gas and smell like a pool liner. If a PVC liner off gasses in the crawl space you will smell it in your home.
Brooklet Residents: Follow These Mold Safety Tips If You Suspect Mold
8/31/2017 (Permalink)
A slow faucet leak can cause a lot of mold growth. Be careful! Without proper training, you could be spreading mold throughout your home.
If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.
What to Do:
- Stay out of affected areas.
- Turn off the HVAC system and fans.
- Contact SERVPRO of Statesboro for mold remediation services.
What Not to Do:
- Don’t touch or disturb the mold.
- Don’t blow air across any surfaces with visible or suspected mold growth.
- Don’t attempt to dry the area yourself.
- Don’t spray bleach or other disinfectants on the mold.
About Our Mold Remediation Services
SERVPRO of Statesboro specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business. Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.
If You See Signs of Mold, Call Us Today – (912) 764-9542